Nissan Maxima Altima Murano Infiniti G35 QX56 FX35 Evaporative Emissions Vapor Canister Vent Valve Solenoid 14935-AM60A

  • Sale
  • $21.90
  • Regular price $35.00
Shipping calculated at checkout.

All modern cars are equipped with an Evaporative Emission Control (EVAP) system. The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere. The EVAP system collects and temporarily stores the fuel vapors in the charcoal canister. The charcoal canister is filled with activated carbon pellets that can absorb the fuel vapors. When the engine is running, the fuel vapors are purged from the canister and burned in the engine.

Details and Specifications:
  • Brand:
  • SKU: SPES27002
  • Weight: 140g
  • OEuff1a911-503uff0c14935-AM600u300114935-AM60Au300114935-AM60Bu3001911503u300114935AM600u300114935AM60Au300114935AM60B
  • Placement on Vehicle: Front

  • 2003-2009 Nissan 350Z
  • 2004-2009 Nissan Altima
  • 2005-2009 Nissan Armada
  • 2009-2010 Nissan Cube
  • 2005-2009 Nissan Frontier
  • 2004-2009 Nissan Maxima
  • 2003-2009 Nissan Murano
  • 2005-2009 Nissan Pathfinder
  • 2004-2009 Nissan Quest
  • 2008 Nissan Rogue
  • 2003-2009 Nissan Sentra
  • 2004-2009 Nissan Titan
  • 2007-2011 Nissan Versa
  • 2005-2009 Nissan Xterra
  • 2008-2009 Infiniti EX35
  • 2003-2009 Infiniti FX35
  • 2003-2008 Infiniti FX45
  • 2003-2008 Infiniti G35
  • 2008-2009 Infiniti G37
  • 2006-2009 Infiniti M35
  • 2006-2009 Infiniti M45
  • 2004-2009 Infiniti QX56

How to replace the Evaporative Emissions Canister Vent Valve Solenoid?
  • Disconnect the vehicle's battery.
  • It is located on the passenger side near the rear tires. In order to gain access to EVAP vent solenoid, you'll need to jack up the vehicle from the recommended jack placement and place the rear of the vehicle on jack stands for support.
  • Locate bolts and slots that hold EVAP vent solenoid.
  • Remove the electrical harness. Attached to EVAP vent solenoid is an electrical harness.
  • Remove vent hoses from EVAP vent solenoid.
  • Remove the bolt holding EVAP vent solenoid.
  • Remove EVAP vent solenoid from clips.
  • Remove old EVAP vent solenoid. After you've released the clips and unbolted the unit, it should come off the vehicle rather simply.
  • Install new EVAP vent solenoid. Once the old unit is off the vehicle, you're ready to install the new unit.
  • To complete this, follow the above instructions in reverse order as indicated below: Slide EVAP vent solenoid onto clips and attach the solenoid to the bracket with the bolts. Reattach vent hoses and electrical harness.

  • Pls carefully verify your year, make, model in the product details or check your parts pictures, parts No. with ours before purchasing so as to prevent wrong purchase meant and unnecessary expenses.
  • If you find the parts not fit your car when you received, pls kindly send it back with an undamaged package. Thank you!

Package Includes:
  • 1 u00d7 Piece Vapor Canister Vent Valve

Product Disclaimer: This product is not designed to meet any emissions/noise standards and is not for street or highway use. This product is not certified and may not be legal for use on emissions-controlled vehicles in any country/jurisdiction. Any other use, including recreational off-road use, may be in violation of local, state, and federal laws. Carrot Top Tuning does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the customer. Carrot Top Tuning will not ship CARB restricted products into CARB restricted areas under any circumstances. ***OFF-ROAD USE ONLY***